WRI Supply Products

Digital Printing Materials for Solvent, Eco-Solvent, UV & Latex / Application Aids and Squeegies

Product NameProd. ID.Roll Size
3M - 391X Air Release Tool391X 
Description:
Puncture film that has already been applied to a substrate to remove entrapped air bubbles.
3M - TSA -2 Application Tool for Textured Concrete FilmTSA-2 
Description:
Textured surface applicator; specialized tool used to conform heated film to mortar joints and inside corners.
3M 392X Replacement Point for 391X392X 
Description:
3M 8oz Liquid Edge Sealer Dauber Can3950-8 
Description:
Edge sealing minimizes the adverse effects of rigorous use or prolonged or severe exposure conditions by providing water and contaminant-tight seal between a graphic film and substrate.
3M Citrus Based CleanerCITRUS-24OZ 
Description:
Aerosol cleaner which can dissolve and flush away dirt, grease, tar, most non-curing type adhesive films, and similar substances. It is a citrus oil based cleaner that emulsifies when flushed with water.

Features:
  • Non-Corrosive
  • Cleans oil, grease, tar and grime
  • Applications: Cleaning, degreasing, preparing, removing, dissolving, softening

3M MPP-1 Power Grip Multi Pin Air Release ToolMPP101 
Description:
Features a uniquely designed grip. With multiple pins, only a single motion is needed per rivet, saving time during installation on all films
3M Orange Squeegies71607 
Description:
Inexpensive, reusable squeegee-type applicator is flexible yet durable. This toolis the perfect solution for applying film or premask.
3M PA-1B Blue Application SqueegiesBA0001 
Description:
This inexpensive, reusable squeegee-type applicator is flexible yet durable. When hand applying film or premask, this tool is the perfect solution for installing graphics on many smooth surfaces. To improve the squeegee's slideability and minimize scratching
3M PA-1G Gold Application SqueegiesGA0001 
Description:
This inexpensive, reusable squeegee-type applicator is flexible yet durable. When hand applying film or premask, this tool is the perfect solution for installing graphics on many smooth surfaces. To improve the squeegee's slideability and minimize scratching
3M Primer 94 ( 1/2 Pint )PRIMER 
Description:
Promotes Adhesion of Vinyl on Complex Curves
3M Primer Ampoules - 0.66 mlPRIMER-AMPOULES 
Description:
3M RBA-1 Rivet BrushRBA001 
Description:
Graphics are easier to install over rivets using this traditional applicator tool.
3M RBA-3 Power Grip Rivet Brush ApplicatorRBA003 
Description:
Burnish all films over rivets with ease. The larger handle grip is more comfortable and encourages full arm movement. Burnish film over rivets faster with the stiffer bristles.
3M SA01 Low Friction SleevesSA0001 
Description:
Resuable paper sleeve slips over the squeegee applicators to protect the substrate from being marked or scratched. Helps protect film when squeeging.

Features:
  • Note: May purchase 1 unit.
  • 20 units per box each unit has 5 sleeves

3M TSA-1 Application Tool for Textured Concrete FilmTSA-1 
Description:
Specialized tool used to conform large areas of film onto a texture surface.
3M TSA-1 Replacement 4" Roller for TSA-1TSA-1RE 
Description:
3m TSA-3 Edge RollerTSA-3 
Description:
Specialized tool used to conform heated film around cut edges and in corners and mosaic-type applications.
3M TSA-4 Replacement 3" Roller for TSA-4TSA-4RE 
Description:
3M TSA-4 Two handed Applicator Large Area 3" RollerTSA-4 
Description:
Two-handled textured surface applicator for large areas. Iincrease installation productivity for graphics on textured surfaces Requires heat gun, not included.